EXACTLY HOW TO SHUT OFF YOUR WATER MAIN

Exactly How To Shut Off Your Water Main

Exactly How To Shut Off Your Water Main

Blog Article

Source This Article


Everyone may have their own unique perception in relation to How to Locate & Turn Off Main Water Shut-Off Valves.


How to Turn off Your Home's Main Water Valve
One of the most common locations a water main will be found in house remains in your boiler room, cellar, or a cut out panel in a section for your house.
When you locate the water pipe you will merely turn the valve clockwise to shut all the water off in your home up until you have actually ended up the repair. Some homes will have a ball valve with a bar that you can draw as opposed to resort to close the water off.
If you try to shut the water off to your fixtures by using an angle stop and that doesn't work you will have to shut of the water pipe to make your repair service. There are additionally several various other factors you could require to close the water pipe like fixing icy pipelines, fixing leaks, replacing fixtures or faucets.
Lots of people are not conscious that they even have a water main valve right in their own house and just call a plumber of never wind up doing the repair service up until points get truly poor since they simply do not know that shutting the water main is really very easy.

How to Find and Shut Off Main Water Shutoff Valve


Where is the main water shutoff valve located?


This is the million-dollar question. Your main water shutoff valve could be located in several different areas. If you have a home with a basement and crawlspace, it is probably located on an interior wall near the front of the house, where the water comes in from the water meter. In this case, it is most likely hiding in plain sight. If your home was built on a slab, the valve might be located near the hot water heater or inside your garage.


How to Turn Off Main Water Valve


Once you find the shutoff valve you will either hand turn it (clockwise for gate valves and perpendicular to the pipe for ball valves) or use the appropriate tool depending on the design.


If it is located inside your house, it will most likely be a gate or “wheel” valve that you’ll simply turn clockwise to stop the flow of water. Another way to shut off the water is to go to the water meter box. Just be careful not to mess with the city shutoff side of the meter.


Where are the isolation valves?


Isolation shutoff valves are much easier to locate. Most essential home plumbing fixtures have separate valves that control the water flow. Sinks, toilets, water heaters, and washing machines should have a small valve located near the plumbing that can easily shut off the individual water supply.


Simply turning the valve clockwise will turn off the water flow. Sink and toilet problems can be dealt with quickly by simply shutting off the supply this way. It’s always good to test the isolation valves periodically to make sure they are working properly.



Again, once your tighten the water shutoff valves and turn off the water, open up your hot and cold lines to release pressure and test if the water is indeed off.



Make it a priority to locate the water valves in your home – and keep plumbing problems from turning into costly repair situations.

https://happyhiller.com/blog/how-to-find-shut-off-main-water-shutoff-valve/


How to Turn off the Water for Plumbing Repairs

I found that piece about How to Turn Off Water To House and Prevent Damage while doing a lookup on the web. Liked our entry? Please share it. Let others locate it. Thank you so much for taking the time to read it.



This Site

Report this page